CN +86-0379 64087499
Close
PRODUCTS
CONTACT US
If you have any questions

Please contact us in time

сitiсic@outlook.com,citichm@outlook.com citichm@outlook.com +86-0379 64087499 Online Message
NEWS
Location: Home - NEWS

Factors Affecting the Application of Self Grinding Process

Time:2022-04-11Views:2997

Because the autogenous process integrates the two functions of crushing and grinding, and the operation is highly complex, its output is affected by multiple factors such as ore properties, operation and ore supply and distribution management, which brings great difficulties to production management. The factors affecting the application of self grinding process are as follows.

(1) Feed Particle Size Composition.   

Semi autogenous mill uses steel ball as grinding medium. Adding steel ball can stabilize the proportion of grinding medium, so as to stabilize the output of semi autogenous mill. The grinding medium of the autogenous mill mainly comes from the lump ore in the feeding, and the particle size is usually 100 ~ 350 mm. The new ore must contain enough lump ore and enough fine ore to maximize the output of the autogenous mill, which brings great challenges to the upstream coarse breaking, mining blasting operation and production allocation management.

 

(2) Crushing Efficiency of Hard Rock.  

The grinding process of autogenous mill is an iterative process of "crushing large blocks into small blocks and crushing small blocks into powder", but its efficiency in treating hard stones is low, so it is necessary to complete the hard stone crushing operation with the help of crusher. The efficiency of the self grinding circuit determines the output and effect of the self grinding operation to a great extent.

 

(3) Product Classification Efficiency of Self Grinding Circuit.  

For the fully closed-circuit self grinding process, the classification method and classification efficiency will greatly affect the output of the autogenous mill.

 

(4) New Ore Properties.

There are many different ore bodies in general large deposits, and the ore properties between ore bodies are also obvious, especially the ore hardness and grindability. The change of ore properties is bound to affect the stable output of autogenous mill.



Because the autogenous process integrates the two functions of crushing and grinding, and the operation is highly complex, its output is affected by multiple factors such as ore properties, operation and ore supply and distribution management, which brings great difficulties to production management. The factors affecting the application of self grinding process are as follows.

(1) Feed Particle Size Composition.   

Semi autogenous mill uses steel ball as grinding medium. Adding steel ball can stabilize the proportion of grinding medium, so as to stabilize the output of semi autogenous mill. The grinding medium of the autogenous mill mainly comes from the lump ore in the feeding, and the particle size is usually 100 ~ 350 mm. The new ore must contain enough lump ore and enough fine ore to maximize the output of the autogenous mill, which brings great challenges to the upstream coarse breaking, mining blasting operation and production allocation management.

 

(2) Crushing Efficiency of Hard Rock.  

The grinding process of autogenous mill is an iterative process of "crushing large blocks into small blocks and crushing small blocks into powder", but its efficiency in treating hard stones is low, so it is necessary to complete the hard stone crushing operation with the help of crusher. The efficiency of the self grinding circuit determines the output and effect of the self grinding operation to a great extent.

 

(3) Product Classification Efficiency of Self Grinding Circuit.  

For the fully closed-circuit self grinding process, the classification method and classification efficiency will greatly affect the output of the autogenous mill.

 

(4) New Ore Properties.

There are many different ore bodies in general large deposits, and the ore properties between ore bodies are also obvious, especially the ore hardness and grindability. The change of ore properties is bound to affect the stable output of autogenous mill.