CN +86-0379 64087499
Close
PRODUCTS
CONTACT US
If you have any questions

Please contact us in time

сitiсic@outlook.com,citichm@outlook.com citichm@outlook.com +86-0379 64087499 Online Message
Ore Dressing Equipment
Flotation Machine
Flotation Machine

Flotation Machine

Product use:
The mineral flotation machine is applicable for separating non-ferrous metal, such as copper, lead, zinc, nickel and molybdenum, the black metal and non-metal mineral which are subject to coarse separation, fine separation and reverse flotation.
Details

Flotation Machine can be used to separate nonferrous  metal, ferrous metal, heavy metal, nonmetallic mine, chemical material such as  gold, copper and recycling minerals. Each chute can inhale gas, sink magma,  separate. No assiting equipments are required,and Flotation Machine must be  levelly installed. Flotation Machine is easy to change the flow chart. The  cycling way of magma is very reasonable. Flotation Machine can reduce the  impurities to a great extent. There is automatic equipment on the magma surface,  easy to adjust. The impeller also owns the upper and lower retroversion blade.  The upper one makes the magma cycle upward, while the lower one makes the magma  cycle downward.


Working principle of Flotation machine

The impellers are driven through V belt transmission,  which brings centrifugal effect to form the negative pressure. On the one hand,  the flotation machine inhales sufficient air to mix with ore slurry; on the  other hand it stirs ore slurry and mix with medication to form the mineralized  froth. To adjust the height of flashboard to control the liquid level and make  the useful froth scraped by loam board. Each chute can inhale gas, sink magma,  separate. No assisting equipments are required, and it must be levelly  installed. It is easy to change the flow chart. The cycling way of magma is very  reasonable. It can reduce the impurities to a great extent. There is automatic  equipment on the magma surface, easy to adjust. The impeller also owns the upper  and lower retroversion blade. The upper one makes the magma cycle upward, while  the lower one makes the magma cycle downward.


Main technical parameter:

Model

XJK-0.33A

XJK-0.62(4A)

XJK-1.1(5A)

XJK-2.8(6A)

XJK-5.8(7A)

Effective  volume(m³)

0.35

0.62

1.1

2.8

5.8

capacity(m³/min)

0.18—0.4

0.3-0.9

0.6-1.6

1.5-3.5

3-7

Rotation Speed  (r/min)

470

400

330

280

240

Blade  diameter(mm)

300

350

500

600

750

Blade motor  (kw)

1.5

3

5.5

11

2230

Scraping  platemotor (kw)

1.1

1.1

1.1

1.1

1.5

Single trough weight (t)

430

860

1380

2330

3533



Flotation Machine can be used to separate nonferrous  metal, ferrous metal, heavy metal, nonmetallic mine, chemical material such as  gold, copper and recycling minerals. Each chute can inhale gas, sink magma,  separate. No assiting equipments are required,and Flotation Machine must be  levelly installed. Flotation Machine is easy to change the flow chart. The  cycling way of magma is very reasonable. Flotation Machine can reduce the  impurities to a great extent. There is automatic equipment on the magma surface,  easy to adjust. The impeller also owns the upper and lower retroversion blade.  The upper one makes the magma cycle upward, while the lower one makes the magma  cycle downward.


Working principle of Flotation machine

The impellers are driven through V belt transmission,  which brings centrifugal effect to form the negative pressure. On the one hand,  the flotation machine inhales sufficient air to mix with ore slurry; on the  other hand it stirs ore slurry and mix with medication to form the mineralized  froth. To adjust the height of flashboard to control the liquid level and make  the useful froth scraped by loam board. Each chute can inhale gas, sink magma,  separate. No assisting equipments are required, and it must be levelly  installed. It is easy to change the flow chart. The cycling way of magma is very  reasonable. It can reduce the impurities to a great extent. There is automatic  equipment on the magma surface, easy to adjust. The impeller also owns the upper  and lower retroversion blade. The upper one makes the magma cycle upward, while  the lower one makes the magma cycle downward.


Main technical parameter:

Model

XJK-0.33A

XJK-0.62(4A)

XJK-1.1(5A)

XJK-2.8(6A)

XJK-5.8(7A)

Effective  volume(m³)

0.35

0.62

1.1

2.8

5.8

capacity(m³/min)

0.18—0.4

0.3-0.9

0.6-1.6

1.5-3.5

3-7

Rotation Speed  (r/min)

470

400

330

280

240

Blade  diameter(mm)

300

350

500

600

750

Blade motor  (kw)

1.5

3

5.5

11

2230

Scraping  platemotor (kw)

1.1

1.1

1.1

1.1

1.5

Single trough weight (t)

430

860

1380

2330

3533